Gear for rotating propeller

With our HVP gears and a reversible propeller, you get the most out of your engine power at all speeds and in all conditions. With a reversible propeller, you get maximum traction and thrust, good maneuverability and low fuel consumption. Our gears are compact and solid. The gears are developed for commercial vessels, but are also excellent for recreational boats.

Untitled design (1)

HVP 25

Reduction Ratio: 3.05:1
Power Factor (hp/rpm): 0.036
Maximum Input Torque: 245
Maximum Input Speed (rpm): 3500
Input Rotation Direction: Counterclockwise, viewed from the rear
Control Rod Travel (mm): 34
Clutch Control: Mechanical
Adapter Flange: Borg Warner
Dimensions (L x W x H (mm)):
Dry Weight (kg): 43
PTO: N/A

Untitled design (2)

HVP 65

Reduction Ratios: 2.21:1 / 3.05:1 / 3.82:1
Power Factor (hp/rpm): 0.093
Maximum Input Torque: 650 Nm
Maximum Input Speed: 2700 rpm
Input Rotation Direction: Counterclockwise (viewed from the rear)
Control Rod Travel: 58 mm
Clutch Control: Electric, 12/24 V
Adapter Flange: SAE 3
Dimensions (L × W × H ((mm)):
Dry Weight: 153 kg
PTO: HVP-PTO
Reduction Ratio: 1:1
Maximum Output Torque: 400 Nm
Output Rotation Direction: Clockwise (viewed towards the connection flange)
Connection Flange: SAE B / C
Shaft Spline: 48 × 44 (DIN 5482)
Dry Weight: 20 kg

Untitled design (2)

HVP 83

Reduction Ratios: 2.90:1 / 3.54:1
Power Factor (hp/rpm): 0.118
Maximum Input Torque: 830 Nm
Maximum Input Speed: 2700 rpm
Input Rotation Direction: Counterclockwise (viewed from the rear)
Control Rod Travel: 58 mm
Clutch Control: Electric, 12/24 V
Adapter Flange: SAE 3
Dimensions (L × W × H (mm)):
Dry Weight: 153 kg
PTO: HVP-PTO
Reduction Ratio: 1:1
Maximum Output Torque: 400 Nm
Output Rotation Direction: Clockwise (viewed towards the connection flange)
Connection Flange: SAE B / C
Shaft Spline: 48 × 44 (DIN 5482)
Dry Weight: 20 kg

Our Gears

Every gear is tested on the test bench and all our models have

  • Built-in servo for turning propeller.
  • Option for 1 PTO with its own hydraulic clutch, or 1 PTO for direct operation.
  • hydraulic multi-plate clutch.
  • display of oil pressure and temperature.
  • possibility of an additional dashboard with switches for gear and PTO.
  • Clear and compact design.
  • type approval from DNV.

Spare parts

You can find spare parts for your HVP gear in our webshop

Webshop

Do you need an overhaul or new gear?

 

We help you overhaul your existing gear or replace it with a new one. We are gear specialists and are happy to assist with solution suggestions, preliminary design and special adaptations. You choose whether we come to you or you come to us.

Contact us

Espen Eriksen
Head of Sales
+47 986 61 908